Precaution; Specific Service Instructions - Kenwood NX-5200 Service Manual

This service manual does not describe PRECAUTION.
2.1 SYSTEM SET-UP
Merchandise received
Choose the type of transceiver
Transceiver programming
Are you using the optional antenna?
Are you using the speaker microphone?
Are you using the secure cryptographic module?
Delivery

PRECAUTION

SPECIFIC SERVICE INSTRUCTIONS

A personal computer, programming interface (KPG-36U/36X),
and FPU (programming software) are required for programming.
(The frequency, and signaling data are programmed for the transceiver.)
YES
NO
YES
NO
YES
NO
SECTION 1
SECTION 2
Frequency range (MHz) RF power
TX/RX 136~174
KRA-22/KRA-26/KRA-41
Optional antenna
(Option)
KMC-41/KMC-42W/ * If the internal GPS function
KMC-54WD
Speaker microphone
(Option)
KWD-AE30/AE31 Refer to the "2.3.1 SECURE CRYPTOGRAPHIC
MODULE (KWD-AE30/KWD-AE31:Option)".
(Option)
Type DTMF keypad
6W NX-5200 F2 No
6W NX-5200 F3 Yes
6W NX-5200 K2 No
6W NX-5200 K3 Yes
Yes
6W NX-5200 E
6W NX-5200 E2
No
is not used, the KMC-47GPSD
can be used as GPS
speaker microphone.
(No.RA018<Rev.002>)1-7