Technical Data Plate; Transport And Installation Of The Awning; Transport Of The Awning; Installation Of The Awning - BAT Screeny 130 Series Instruction Manual

Table of Contents

Screeny 130 Line

Instruction manual

3.4 - Technical Data Plate

The Technical Data Plate (A) which lists the details for the manufacturer is generally applied to the inner part of the bottom profile section.

The Technical Data Plate (B) which lists the product data and specifications is generally provided with the sales documentation.

MANUFACTURER'S FULL NAME + ADDRESS

See section 3.3

SCREENY GA

TECHNICAL DATA PLATE (A)

TECHNICAL DATA PLATE (B)

Transport and shipping are the responsibility of the reseller and/or the manufacturer, who shall transport the product using packaging

suitable to protect it up until delivery to the end customer.

Damage to the product sustained during removal of the awning and subsequent handling and/or transport, performed after the

initial installation, is not covered by warranty.

The packaging material must be disposed of and/or recycled pursuant to applicable local legislation.

Assembly of the components, installation and first start of the product must only be performed by

specialised and qualified technicians, and is the responsibility of the reseller and/or manufacturer.

All instructions and the main safety standards for performing these operations are described in the "Assembly manual" and the "Installer

manual".

The position chosen by the user for installation of the product must provide adequate support as well as the space necessary for the

awning to open fully (see "Installer manual").

23.07.15 - rev.03

Table of Contents