Advertisement
LIGHT KIT
10. Raise the seat and locate the main harness connector. FIG. 7
11. Remove and discard the plug from the main harness connector. FIG. 7
12. Pull the light harness, at the light harness connector until all the excess harness is
removed from along the mower frame. FIG. 8
13. Insert a push mount into the mower frame and insert a wire tie into the push mount.
FIG. 8
14. Connect the light harness to the main harness. FIG. 8
15. Attach the light harness to the mower frame as shown. FIG. 9
16. Position the excess light harness as shown and secure in place with the wire tie.
FIG. 8
17. Check the light harness routing and make sure the harness does not come in contact
with any moving parts. Correct as necessary.
Plug
Main harness
connector
FIG. 7
6
121672 REV. A
Advertisement
