Page 1
INSTRUCTION 121481 REV. C LIGHT KIT PART NUMBER: 121482 PACKING LIST: Listed below are parts included in this kit. If any parts are missing or damaged, please contact the ® Hustler Parts Department. Retain these instructions for replacement parts. INDEX NO.
Page 2
LIGHT KIT 121481 REV. C Use extreme caution if it becomes necessary to operate the unit, transporting or mowing, after dark or in low light situations. Only operate in open areas where there are no overhead obstructions; i.e. guide wires, tree branches, low overhangs, etc.
Page 3
LIGHT KIT 121481 REV. C 16. Re-connect the negative battery cable. 17. The lights should only work when the key is in the “RUN” position and the light switch is in the “ON” position. Existing hardware Front panel INDEX NO. DESCRIPTION HEADLIGHT MOUNT LIGHT...
Page 4
LIGHT KIT 121481 REV. C Right side mower frame Light harness Wire tie Wire tie INDEX NO. DESCRIPTION WIRE TIE Push button PUSH BUTTON MOUNT mount LIGHT HARNESS FIG. 2 FIG. 3 Switch slot Switch slot FasTrak instrument panel shown FasTrak SD instrument panel shown FIG.
Page 5
LIGHT KIT 121481 REV. C Switch Plug light ON position harness into Switch switch here FIG. 6 FIG. 7 Auxiliary connector Light harness plug Auxiliary connector Auxiliary connector FIG. 8 FIG. 9...
Page 6
LIGHT KIT 121481 REV. C Instrument panel INDEX NO. DESCRIPTION WIRE TIE LIGHT HARNESS FIG. 10...
Need help?
Do you have a question about the 121482 and is the answer not in the manual?
Questions and answers