Advertisement
LIGHT KIT
5. Insert the push button mounts into the mounting holes located in the mower frame.
FIG. 2
NOTE: Make sure to insert the push button mounts in from the top of the frame.
6. Insert wire ties through the push button mounts to secure the light harness.
7. Attach the new foot rest using existing hardware. FIG. 1
8. Insert the push mounts into the side of the left frame rail. Insert wire ties into the
push mounts for securing the light harness in the next step. FIG. 3
Push Button Mount
FIG. 2
Push Mount
FIG. 3
3
121672 REV. A
Advertisement
