Table of Contents
Advertisement
February 2020
If the Emerson Location Anchor was configured with the network ID and join
key, and sufficient time has passed, the Anchor will be connected to the
network. If network ID and join key were not configured, reference
"Troubleshooting".
Note
It may take several minutes for the Location Anchor to join the network.
Field Communicator
For WirelessHART communication, an Emerson Location Anchor Device
Driver (DD) is required. To obtain the latest DD, visit the Emerson Easy
Upgrade site at: Emerson.com/Rosemount/Device-Install-Kits.
The communication status may be verified in the wireless device using the
following the menu items.
Function
Communications
Wireless Gateway
Using the Gateway's web interface, navigate to the Devices page as shown
in
Figure
good (green).
Figure 5-1: Wireless Gateway Explorer page
Quick Start Guide
Menu items
Join Status, Wireless Mode, Join Mode, Number of
Available Neighbors, Number of Advertisements Heard,
Number of Join Attempts
5-1. Locate the device in question and verify all status indicators are
Quick Start Guide
15
Advertisement
Table of Contents
