Lindy 32488 User Manual

Video Switches
User Manual
2 Port Version: No. 32488
4 Port Version: No. 32489
www.lindy.com
For Home and Office Use
Tested to Comply with FCC Standards
Hardware Requirements
1 x VGA, SVGA, XGA or Multisync compatible monitor, with
a standard 15 pin HD Male connector
1 x 15 Way HD Male to 15 Way HD Male video cable for
each connected computer (not included - see recommended
cables below)
Recommended Cables
To maintain optimal image quality we recommend the following
LINDY Premium S-VGA Monitor Cables –
1m 37341
5m 37344
Overview
Front
2 & 4 Port
2m 37342 3m 37343
7.5m 37345 10m 37346
Introduction
Thank you for purchasing the LINDY Electronic Video Switch.
This switch allows you to connect the video output of 2/4
computers to a single monitor. The unit uses electronic switching
technology rather than mechanical switching, for maximum
reliability and durability.
Packing List
2 or 4 Port Electronic Video Switch
Power Adapter
English
This manual
Features
Electronic Switching Technology
Allows the video output of two (Part No. 32488) or four (Part
No. 32489) computers to be connected to a single monitor
High resolution video support – up to 1920 x1440; DDC,
DDC2, DDC2B
Supports VGA, SVGA, XGA and Multisync Monitors
Plug & Play – no software or extra configuration required
Computer selection via push button
1. Port Selection Switch
Press this button to switch between the connected computers
2. Port Selection LEDs
The numbers correspond to the video ports on the back panel.
An LED lights for the currently selected port
Rear
1. Monitor Port
The monitor plugs in here
2. Video Ports
The video cables from the computers plug in here
3. Power Socket
The cable from the DC power adapter plugs in here