Whelen Engineering Company CenCom Core C399 Installation Manual page 6

Setting Device Diagnostic
Indicators:
The diagnostic indicators on the main Core controller
are always on so that the user has more resolution as
to what state the system is in. Individual devices
connected to Core need to be configured manually in
the configuration itself. It is recommended that you
always enable the diagnostic indicators on all WecanX
devices in your configuration. This will enable you to
visually see the status of the devices, and to
determine what state the device is in as well as if the
device has gone to sleep. To turn on diagnostic
indicators, go into configuration settings and select
diagnostic indicators. From there you can choose
which devices you would like to enable and the
intensities of the indicators.
NOTE: The diagnostic indicators are very useful for following the progress of large configuration transfers to external sirens.
Page 6