Advertisement
General
1.1 Preparation of the lens
Overview
This lens can be mounted on 4 different projectors and in different position for each projector. E.g. facing up,
facing to the left or facing to the right. For each position the lens has to be rebuild according the its use and
projector type. The motor housing must be turned to the correct position before the lens is mounted in the
projector.
The following positions for the lens are possible:
•
For F40: facing up, to the left and to the right (not indicated on drawing)
Image 1-1
•
For F70: facing up and to the left
Image 1-2
Do not use for projection to the left when mounted in a frame.
•
For F80: facing up and to the left
4
R5912118 /01
UST lens for F-series
Advertisement
