Advertisement
Image 2-25
8.
Place the clamping bracket on the lens so that the fixation holes matches the holes in the support.
Drive in both fixation screws. If necessary, move the 3th plate a little bit until it fully match with the lens.
Fully secure both screws.
Image 2-26: Mount clamp bracket
9.
Fully fasten the screws of the 3th plate and the nuts of the 2nd plate so that the support is fully assembled.
The projector is ready for use.
Mounting the lens
R5912118 /01
UST lens for F-series
25
Advertisement
