Basic Operations; Playing Operation; Velocity; Transpose - midiplus EK490 plus Owner's Manual

Chapter2. Basic Operations

2.1. Playing Operation

2.1.1.

VELOCITY

Toggle whether keyboard reads velocity (the initial force used to press the key). Velocity is read
by default.
2.1.2.

TRANSPOSE

Change the relative pitch of the keyboard.

Press the TRANSPOSE【+】or【-】button. Each button press will transpose the keyboard by
a semitone from –5 to +6.

Press the TRANSPOSE 【+】 and 【-】 buttons simultaneously to reset the transpose value to the
default ("C"). Button lights will turn off on reset.
2.1.3.

LAYER

Layer Voice1 and Voice2 on top of each other, chosen using 【VOICE1 SELECT】 and 【VOICE2
SELECT】.
2.1.1.

DOUBLE KEYBOARD

Split the keyboard into two voices, Voice2 (C1 – F#2) and Voice1 (G2 – C5). Raises Voice2 by two
octaves. Modulation will only apply to Voice1.
2.1.2.

SUSTAIN

Toggle sustain. Sustain is off by default.
2.1.3.

REVERB

Toggle reverb. Reverb is off by default.
2.1.4. DOUBLE KEYBOARD
Split the keyboard into two voices, Voice2 (C1 – F#2) and Voice1 (G2 – C5). Raises Voice2 by two
octaves. Modulation will only apply to Voice1.
MIDIPLUS Co, Ltd. 5 http://www.midiplus.com.tw