Renault MEGANE Vehicle User Manual page 176

TYRE PRESSURE MONITOR
The table below shows the possible messages related to the tyre resetting procedure.
Steps Displays
1
2
3
4
2.40
(3/5)
Messages
Tyre pressure init. long press
Learning Tyre Pressures
Tyres location in progress
Readings
With the ignition on and the vehicle stationary, start the
resetting the pressure of all four tyres by pressing and
holding the 4 OK switch.
The "---" quote marks in front of each wheel will flash to
indicate that the system has registered the tyre pressure
reset for all four wheels.
The "---" quote marks in front of each wheel will remain
lit. This system resets the tyre pressure of all four tyres.
You can now drive. The message may remain displayed
during short journeys.
Note: during the reset, tyre pressure monitoring remains
in operation.
The pressure value of the four tyres is displayed: the re-
setting procedure is complete and successful.