Rear View Mirrors Which Tilt In Reverse Gear; Position Memory; Recalling The Memorised Position; Returning To The Driving Position - Renault MEGANE Vehicle User Manual

REAR-VIEW MIRRORS
1
Rear view mirrors which tilt
in reverse gear
For vehicles equipped with the driver's
seat with position memory, you can
enter a specific setting for the door mir-
rors when reversing and store the po-
sition.
With the vehicle at a standstill and re-
verse gear engaged, select the door
mirror using switch 2 then, with button 1,
adjust it to the required position.
(2/3)

Position memory

– Adjust the door mirrors (see previous
paragraphs);
– Refer to the multimedia instructions
to access the settings memory. Save
the settings.
The positions of the door mirrors in
forward and reverse gear, and the po-
2
sition of the driver's seat are saved si-
multaneously.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
Recalling the memorised
position
Refer to the multimedia manual to
access recall of the saved position.
Select " Call back".
The positions of the door mirrors in
forward gear, reverse and of the front
seats are recalled.

Returning to the driving position

Moving from reverse gear to a forward
gear is done:
– approximately 9 seconds after re-
verse gear has been disengaged
when the speed is lower than 6 mph
(10 km/h);
– forward gear engaged when the
speed is greater than 6 mph
(10 km/h);
– when the engine is stopped;
– when switch 2 is in neutral position.
1.99