West Elm Brass Orbit Mirror Mounting Instructions


For safety and ease of mounting, two people are recommended.

Handle carefully to avoiding scratches to both the item & the wall during the mounting.

HARDWARE ENCLOSED:

(A) Drywall Anchor x2
(B) Screw x2

TOOLS REQUIRED:

Phillips Screwdriver / Pencil / Tape Measure / Level / Stud-finder

Hanging Orientation Options:

Mounting Steps:

1. First, use a tape measure to measure the exact distance between
the two keyholes (measure from center to center of each keyhole,
as shown).
Record this measurement as "Distance A".
2. With the back of the item facing away from the wall, hold the item
straightly at a desired mounting location.
Use a pencil to mark the wall on each side of the item and in
alignment with the two keyholes. Then set the item aside.
3. Connect the two marks of Step (2) with a light pencil line and use a level to ensure the line is level.
Make two "insertion marks" centered along this line with a measurement equal to "Distance A".
A
B
Note: The hardware included with this item is meant
for drywall or stud mounting only. For other wall
types, please consult your local hardware store for
assistance in selecting the appropriate hardware.
1
3
Brass Orbit Mirror
MOUNTING INSTRUCTIONS
2
P: 1 / 2