Johansson Profiler SAT User Manual page 12

Manually level setting
To set manually the level.
- Select the desired input or cluster.
- Turn the button to choose the Select Filter mode.
- Push the rotary button to enter the selected mode.
- Turn the button to select BI-II.
- Push the button to confirm.
- Turn the button to select the Manual Level mode.
- Push the rotary button to enter the selected mode.
- Turn the button to set manually the level, variable from 20 dB to 0 dB (30 dB to 0 dB for clusters).
- Push the button to confirm.
Example : setting the level of BI-II
Select Filter
Select Filter
I-II
LED is activated
Select Filter
Manual Level
Manual Level
Manual Level
Repeat this section to set all levels
12
The LED is green.
The LED is now RED colored.
III VHF-UHF 1 2 3 4 5
UHF Clusters
The LED is green.
The LED is green.
The LED is now RED colored.
The LED is green.
6 7 8 9 10