How To Use The Thread Trimming Counter - JUKI CP-170 Instruction Manual

7. HOW TO USE THE THREAD TRIMMING COUNTER

Bobbin thread counter indication can be changed over to thread trimming counter (simplified sewing counter)
indication by the operation below.
) Function setting No. 6 Turn OFF the setting of bobbin thread counter function. .
Function setting No. 6 0 : off / 1 : on
2) Function setting No. 14 Turn ON the setting of sewing counter function.
Function setting No. 14 0 : off / 1 : on
3) From turning ON the power next, the counter indication works as the thread trimming counter.
Every time thread trimming is performed, the counter indication is upped.
After selecting each item, be sure to perform updating of the function setting No.
When turning OFF the power without performing updating, the set contents are not changed.
For the updating procedure, refer to the function setting procedure described in the Instruction
Manual supplied with the control box.
4) When reset switch 1 is pressed, the contents of indication 2 will be reset to " 0 ".
5) When modifying the count value, increase/decrease the value with setting switch 3 .
- 9 -
2
3
1