Subscribe to Our Youtube Channel
Related Manuals for Salcom 12-86-9000
Summary of Contents for Salcom 12-86-9000
- Page 1 12-86-9000 UHF Call Point Transmitter PRODUCT MANUAL Version 1.01 February 2019 Copyright © 2017 Sea Air and Land Communications Ltd. All rights reserved.
- Page 2 P a g e Salcom Product Documentation This document is designed to familiarise you with Salcom products and guide you through the hardware, configuration, installation and overall system management. Salcom is an environmentally conscious company and in an effort to conserve paper no longer prints manuals with shipped products.
-
Page 3: Warranty And Disclaimer
P a g e Warranty and Disclaimer Salcom products are warranted for a period of 12 months from the date of purchase against faulty materials and workmanship. Should any fault occur the unit should be returned to the vendor, freight pre-paid. Please include a description of the fault to assist with prompt return. Any unauthorised alterations or repairs will invalidate the warranty. -
Page 4: Product Overview
The 12-86-9000 fits the form factor of many standard electrical face plates, so that the transmitter can remain in keeping with surrounding switchgear in cosmetically sensitive areas. By default the 12-86-9000 is supplied with a mounting block, but can be flush mounted in the same manner as most electrical switch plates if required. -
Page 5: Operation
POCSAG message being transmitted. The red transmit LED can also be used as an indication of battery health, and should the LED be dim or fail to light, the CR2032 button cell should be replaced. 12-86-9000 CALLPOINT TRANSMITTER Product Manual Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand... - Page 6 In order to program the12-86-5000 PCB, programming software should be downloaded from the Salcom website (www.salcom.co.nz). A Salcom 12-47 programming lead is required to program the 12-86 transmitters (the same lead used to program the 11-85 transmitters). This may be purchased separately. The 12-47 programming lead requires the availability of a PC with a serial port, running windows XP.
-
Page 7: General Configuration
Beep Level: Pager beep priority set - 1 highest, 4 lowest. CapCode: Pager ID. Valid codes are 0000008 to 2000000 12-86-9000 CALLPOINT TRANSMITTER Product Manual Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand February 2019... -
Page 8: Battery Replacement
After battery replacement, test that the 12-86 is functional by sending a test message and verifying the red LED lights. If the unit fails to operate, remove battery, confirm correct battery orientation and reinsert. 12-86-9000 CALLPOINT TRANSMITTER Product Manual Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand... -
Page 9: Technical Specification
P a g e Technical Specification Technical Specification 12-86-9000 – UHF Call Point Transmitter Frequency Range 440-470MHz - UHF Frequency Selection User configurable Power Supply 3V CR2032 button cell Battery Life Approx. 1000 transmissions Approx. 10 years standby Power Consumption... -
Page 10: How To Contact Us
P a g e How to Contact Us Sea Air and Land Communications (Salcom) Ltd 10 Vanadium Place Addington Christchurch 8024 New Zealand +64 (0)3 379 2298 W: www.salcom.com support@salcom.com sales@salcom.com 12-86-9000 CALLPOINT TRANSMITTER Product Manual Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand...
Need help?
Do you have a question about the 12-86-9000 and is the answer not in the manual?
Questions and answers