Salcom 11-08-0000 User Manual

TM
11-08-0000
MULTI-STATUS
ALARM TRANSMITTER
User's Manual
Sea Air and Land Communications Ltd, 120 St Asaph Street, Christchurch, New Zealand
SALCOM 11-08 MULTI-STATUS ALARM TRANSMITTER
SALCOM 11-08
MULTI-STATUS ALARM TRANSMITTER
DESCRIPTION The 11-08 eight input alarm transmitter operates as a one way alarm
control signalling system. It has an internal tone sequential encoder
interfaced to an on-board 160mHz FM 0.5 watt transmitter. The 11-08
is normally used with an associated Salcom SR160 receiver and a
suitable decoder such as the Sigtec P1310NTC or T2160.
The encoder is field programmable and can be tailored to many
applications where one way signalling meets the system criteria. Some
examples are:
! Remote control of pumps and indication of pump status.
! Water level alarming in association with pump control.
! Security alarm and monitoring.

Features

: The features provided in the 11-08 include:
! Low Power consumption
! Multiple Address Codes
! Multiple Signalling Fomats
! Supports 2 Tone Sets
! Individual Switch debounce
! Two Individual Poll Timers
! Four Substitute tones
! Able to force read the current state of all input switches
! Fully field programmable
! Random retry timer
! Enable random timer on any or all switches
! Switch Power-up mask
! Switch Input phase
! Disarm ALL inputs
! On board CPU Cop
! Lead-in-Delay
! Retry Timer
! Input Designated to cancel Retry timer.
! Twin Internal Low Battery Detector.
Sea Air & Land Communications Ltd.
USER'S HANDBOOK ISSUE 1108UA 07/94
- 7 milliamps (typ.)
- 4 available of 16 tones
- 5 tone, 5 tone+status and 11 tone.
- CCIR & EIA
- Fully field programmable
- Fully field programmable
- Fully field programmable
- EEROM (thru serial adpt)
- 0 to 6.4 seconds
- Fully field programmable
- Fully field programmable
- To allow maintenance
- Internal CPU watchdog
- Fully field programmable
- Fully field programmable
Page 2