Usage Of Your Wallb-E Eco 2.0; Charging Process: Start And Stop; Authorisation Via On/Off Button; Authorisation Via Keyswitch - wallb-e eco 2.0 3,7kW Installation And User Manual

5.0 Usage of your wallb-e eco 2.0

5.1 Charging process: start and stop

Every wallb-e eco 2.0 comes with a customer individual lock & release mechanism.
Please follow the instructions and recommendations according to your wallb-e eco 2.0
variant.

5.1.1 Authorisation via ON/OFF Button

1. Connect your wallb-e eco 2.0 charging cable to your vehicle.*
2. Press your wallb-e eco´s ON/OFF button.
a. Your wallb-e eco 2.0 is ready and charging as long as the ON/OFF button
b. Press the ON/OFF button again to stop the charging process.
3. Please remove the charging cable from your vehicle.**
*(You are free to authorise the charging process beforehand.)
**(In some cases you have to unlock the charging cable on your vehicle using the EVs
remote control.)

5.1.2 Authorisation via Keyswitch

1. Connect your wallb-e eco 2.0 charging cable to your vehicle.*
2. Please activate your wallb-e eco´s keyswitch using the provided keys.
a. Position 1 enables the charging process.**
b. Position 0 stops the charging process.
3. Please remove the charging cable from your vehicle.***
*(You are free to authorise the charging process beforehand.)
**(You are free to remove the key during the charging process, enabling a permanent
authorisation of your wallb-e.)
***( In some cases you have to unlock the charging cable on your vehicle using the EVs
remote control.)

5.1.3 Authorisation via RFID*

1. Connect your wallb-e eco 2.0 charging cable to your vehicle.
2. Please hold your RFID-Card in front of your RFID-Cardreader.
a. A successful authorisation is signalised by a green LED and the memory-
b. An unsuccessful authorisation, e.g. caused by using RFID-Cards which are not
3. Please use your EVs remote control to stop the charging process.
4. Please remove the charging cable from your vehicle.
5. As soon as the charging process is stopped, you need to authorise once again to use
your wallb-e eco 2.0.
*(You can find the manual to program or remove RFID-Cards in your wallb-e eco 2.0
package – Available in English and German.)
30
glows.
storage position of your RFID-Card
programmed is signalised by two lines on the display and in some cases a red
LED.
Petring Energietechnik GmbH – Paderborner Str. 76 – 33189 Schlangen
Tel: +49 5252 989440 Mail: inquiry@wallb-e.com