Technical Details: Electrical Connection-Conditions - wallb-e eco 2.0 3,7kW Installation And User Manual

4.1 Technical details: Electrical connection-conditions

Electrical connection-conditions
Model
Input terminal
Supply line
LS_switch/
preliminary fuse
RCD
6. Be aware that you have to install an adequate LS-switch (see table) in the
subdistribution!
7. Be aware that you have to integrate an RCD (see table) in the sub distribution if you
are installing one of the following wallb-e eco 2.0 versions: 11kW and 22kW.
8. wallb-e eco 2.0 with charging cable Type 1 or Type 2.
a. Only the 3,7kW, 4,6kW and 7,4kW variants feature an integrated RCD.
9. wallb-e eco 2.0 with Type 2 socket:
a. Only the 3,7kW and 4,6kW version feature an integrated RCD.
10. We strongly advise you to follow local norms and regulations.
11. We strongly recommend:
Residual Current Operated Devices (RCD's) "Every connection point needs to be
protected with its own residual current operated device (RCD) with a calculation
difference stream, which shouldn't be more than 30mA. The selected residual
current operated device (RCD) needs to turn off all active wires including the neutral
wire. The connection point of the selected residual current operated device (RCD)
should be at least a Type A. If the characteristic of the charging performance is not
known, referring to the possible DC fault currents of more than 6mA, protection
measures need to be taken if DC fault currents appear, e.g. using a residual current
operated device (RCD) Type B or Type A (EV)."
The installation, connection and initial start-up must be performed by trained
23
wallb-e eco 2.0 wallb-e eco 2.0
3,7kW
X1
L1/N/PE
NYM-J
3x2,5mm²
1 pol. x C 16A 1 pol. x C 20A
Fi Typ A or
Typ A (EV)
0,03A/25A
Questions: +49-5252-989440
personnel with corresponding abilities.
Petring Energietechnik GmbH – Paderborner Str. 76 – 33189 Schlangen
Tel: +49 5252 989440 Mail: inquiry@wallb-e.com
wallb-e eco 2.0
4,6kW 7,4kW
X1 X1
L1/N/PE L1/N/PE
NYM-J NYM-J
3x2,5mm² 3x6mm²
1 pol. x C 32A
Fi Typ A or Fi Typ A or
Typ A (EV) Typ A (EV)
0,03A/25A 0,03A/40A
wallb-e eco 2.0 wallb-e eco 2.0
11kW 22kW
X1
L1/L2/L3/N/PE L1/L2/L3/N/PE
NYM-J NYM-J
5x2,5mm² 5x6mm²
3 pol. x C 16A 3 pol. x C 32A
Fi Typ A (EV) Fi Typ A (EV)
0,03A/40A 0,03A/40A
X1