Advertisement
■ Back/Top and Bottom/Left and Right
G u Volume up key/d Volume down key
Adjust the volume. Also, set/disable manner mode.
H g Assistant key
The key is meant to trigger the Google Assistant™.
It can also be used to trigger functions chosen by the user.
• For details, refer to "Online Manual" (Japanese) or "取扱説明書詳細版
(Full Instruction Manual)" (Japanese).
I f Power key
Use to turn the power on/off and turn the screen on/off.
J Sub microphone
*1
*2
K 5G/4G/UMTS antennas
L Wide camera lens
M Standard camera lens
N Telephoto camera lens
O Decoration of camera cover
*1
With an air vent
to maintain product performance.
P Mobile light
Q 5G/4G antennas
*2
R External connection jack
Use when connecting TypeC Common AC Adapter 01/02 (sold separately),
USB Type-C™ cable (commercially available), USB cable for peripherals
(commercially available), etc. to the product.
*1
S Speaker
T Earphone/Microphone jack
U Wi-Fi
®
/Bluetooth
®
/GPS antennas
®
*2
V Wi-Fi
/GPS antennas
W 5G/4G/Wi-Fi
®
*2
antennas
X & mark
*1
Y Mouthpiece (Microphone)
Z au IC Card/microSD memory card tray
*1 Covering the sections with stickers, fingers, etc. may hinder product performance.
*2 Antennas are built into the product. Do not cover with hand during calls or data
communication. Doing so may affect call/communication quality.
◎ The back cover of the product cannot be removed. Removing it forcibly
may cause damage or a fault.
◎ The battery is built into the product, and cannot be removed by the
customer. To force the power off if the screen freezes etc., hold down
f for at least 8 seconds.
◎ This product use it for both a earpiece (receiver) and a speaker. The
volume will incrementally rise to the set volume so that loud sounds do
not come out of the speaker in your ears after the speakerphone is
switched to during calls, or after calls are finished.
Proximity sensor/Light sensor
◎ Placing stickers, etc. over the proximity sensor/light sensor may prevent
the product from operating properly.
◎ Do not stare into proximity sensor.
May temporarily affect eyesight, leading to accidents.
Earphone/Microphone jack
◎ An earphone/microphone with the switch or depending on the type of the
earphone/microphone, it may not be available with the product.
IMEI plate
◎ A plate with the sticker which the IMEI number (International Mobile
Equipment Identifier) is printed is stowed near the au IC Card/microSD
memory card tray. Except when the IMEI number is required such as
requesting servicing or repairs, do not pull out the plate or remove the
sticker.
For details on handling IMEI plate, refer to "Online Manual" (Japanese) or
"取扱説明書 詳細版 (Full Instruction Manual)" (Japanese).
*2
Attaching the au IC Card
Before attaching the au IC Card, turn the product off.
Also, attach it with the display side turned up.
• If a clear case (sample) is attached to the product, remove it. For details,
refer to "Online Manual" (Japanese) or "取扱説明書詳細版 (Full Instruction
Manual)" (Japanese).
• The included SIM eject tool (sample) is required to attach/remove the au IC
Card.
A Insert the tip of SIM eject tool (sample) into the au IC Card/
microSD memory card tray eject hole.
Insert it horizontally until the card tray comes out.
If you do not insert it horizontally, may cause a fault or damage.
B Pull out the au IC Card/microSD memory card tray.
C Put the au IC Card to the au IC Card/microSD memory card
tray with the IC (metal) side turned down.
Check the direction of the au IC Card and put it securely.
Not to let the au IC Card lift up from the card tray.
If the au IC Card does not fit the card tray, may cause a fault.
D Insert the au IC Card/microSD memory card tray all the
way to the product straight and horizontally.
Push the A areas securely and make sure there is no space between the
product and the card tray.
Attaching or removing the au IC Card/microSD memory card tray
◎ When pulling out the card tray from the product, pull it slowly and
horizontally with the display side turned up.
• Pulling out the card tray forcefully or obliquely may cause damage.
◎ When attaching the card tray, insert it slowly with the display side turned
up and make sure there is no space between the product and the card
tray.
• Do not insert the card tray with the wrong side down. Failure to do so
may cause damage it.
• Inserting the card tray not deeply enough may cause impairment of the
waterproof/dustproof property or prevent the product from functioning
properly.
Notch
IC (metal)
Advertisement
