Page 1
Respirex™ RJS Respiratory and Chemical Protective Suits. Respirex™ RJS Respiratory and Chemical Protective Suits Type 3 Type 3-B Type 4 Type 4-B Type 5 Type 5-B Type 6 Type 6-B EN14605:2005+A1:2009 EN14126:2003 EN ISO13982-1:2004+A1:2010 EN13034:2005+A1:2009 BS112/2018 GB IE ZL...
Type 3,Type 4 and Type 6), and EN14126 (Protective Clothing Against Infective Agents). The 3M™ Jupiter™ Air Filter Unit (JP-ER-03), when used in conjunction with the Respirex™ RJS suit, meets the requirements of European Standard EN12941 TH3 (Respiratory Protective Devices - Powered Filtering Devices).
Page 4
3M™ Jupiter™ JP-ER-03. No other combination of protective suit and Air Filter Unit are approved or permitted. If a helmet is to be worn when using RJS suits, please contact Respirex customer services department for advice.
OPERATING CONDITIONS The 3M™ Jupiter™ Air Filter unit must only be used with the Respirex™ RJS suit, and within the Operating Conditions: -5°C to +50 °C when using a rechargable battery, or -10°C to +50°C when using a single use battery; <90% humidity and <4500mASL (Above Sea Level).
Page 6
15). The gloves attached to the RJS suit offer chemical protection against a range of common chemicals. Please contact Respirex customer services for advice. The attached “integrated sock bootees” on the RJS suit are designed to provide chemical protection to the foot area. Additional mechanical protection for the feet is required.
DOFFING Do not remove the suit, open the flap or zip, remove the filters or turn off the Air Filter Unit until you have vacated the contaminated area. Doff using a buddy system, where a “buddy” wearing suitable PPE, assists in the doffing of the system.
CAUTION DO NOT DISPOSE OF NiMH OR LITHIUM BATTERIES IN A FIRE OR SEND FOR INCINERATION. Battery packs should be treated as special waste and in accordance with your local environmental regulations. The Respirex™ range of RJS Suits are designed for single exposure only and should not be reused after exposure to hazardous environments.
Page 9
Full body protection level demonstrated by the RJS suit (see technical specification) Date of manufacture Model Identification CE mark TEL +44 (0)1737 778600 FAX +44 (0)1737 779441 info@respirex.co.uk UNIT F, KINGSFIELD BUSINESS CENTRE, PHILANTHROPIC ROAD, REDHILL, SURREY, RH1 4DP. UNITED KINGDOM 0086 MODEL No: RJS300 MATERIAL:...
Select appropriate size garment to allow sufficient movement for the task. Label Size Height (cm) Chest (cm) Extra Small 150 - 157 74 - 91 Small 157 - 165 91 - 107 Medium 165 - 173 107 - 116 Large 173 - 180 116 - 122 Extra Large...
Page 11
Respirex™ RJS Suits meet the requirements of the following Protective Clothing standards: General Requirements Test Result RJS 300 RJS 400 General Requirement EN340:2003 Protective performance against liquid chemicals EN14605:2005+A1:2009 complies complies (liquid-tight Type 3) Protective performance against liquid chemicals...
Page 12
Class Chemical Tested to EN ISO 6529:2001 RJS 300 RJS 400 Chemical permeation resistance Sulpuric Acid 95-98% CAS No. 7664-93-9 Chemical permeation resistance Sodium Hydroxide 40% CAS No.1310-73-2 Chemical permeation resistance Methanol 99.9% CAS No.67-56-1 Class Chemical Tested to EN ISO 6530:2005 Repellency index RJS 300 RJS 400...
Module D of the European PPE Regulation (EU) 2016/425 under the supervision of the notified body: BSI, Davy Avenue, Knowhill, Milton Keynes, MK5 8PP, United Kingdom, EC Notified Body No 0086. These garments are described in the manufacturer’s technical file TF094, Issue B. Done at: RESPIREX, Redhill, Surrey, on 7 November 2018 Signed:…………………………..
Page 16
RESPIREX INTERNATIONAL LTD, Unit F Kingsfield Business Centre, Philanthropic Road, Redhill, Surrey RH1 4DP United Kingdom Tel. +44 (0) 1737 778600 Fax.+44(0) 1737 779441 www.respirexinternational.com BSI (0086), Type Examination By : Kitemark Court, Davy Avenue, Knowhill, Milton Keynes MK5 8PP...
Need help?
Do you have a question about the RJS Series and is the answer not in the manual?
Questions and answers