Installing The Auxiliary Handle; Installing The Guard - Toro Power Plex 51481 Operator's Manual

3

Installing the Auxiliary Handle

Parts needed for this procedure:
1 Auxiliary handle
Procedure
1. Line up the groove along the handle with the groove
on the auxiliary handle and slide the auxiliary handle
toward the trimmer handle (A of
2. Snap the handle securely into place (B of
4

Installing the Guard

Parts needed for this procedure:
1 Guard
2 Phillips head screw
Procedure
1. Remove the 2 Phillips screws that are taped to the
guard and slide the guard onto the trimmer base (A
of Figure 4).
Figure 3).
Figure
Figure 3
2. Secure the guard onto the base of the trimmer with the
2 Phillips screws (B of
5
3).
Installing the Edge Guard
Parts needed for this procedure:
1 Wire edge guard
Procedure
Slightly spread the ends of the wire edge guard apart and
insert the ends into the holes in the trimmer housing as
shown in Figure
g195362
8
Figure 4).
Figure 4
5.
Figure 5
g203804
g203740