Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
Note: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to
the Battery Pack (page
10).
1
Mounting the Battery Charger
(Optional)
No Parts Required
Procedure
If desired, mount the battery charger securely on a wall using
the wall-mount key holes on the back of the charger.
Mount it indoors (such as a garage or other dry place), near a
power outlet, and out of the reach of children.
Refer to
Figure 1
for assistance in mounting the charger.
Note: Slide and twist the charger over the appropriately
positioned hardware to secure the charger in place (hardware
not included).
Description
No parts required
No parts required
Auxiliary handle
Guard
Phillips head screw
Wire edge guard
Qty.
–
Mount the battery charger (optional).
–
Unfold the handle.
1
Install the auxiliary handle.
1
Install the guard.
2
1
Install the edge guard.
6
Use
Charging
Figure 1
g194202
Advertisement
Table of Contents
