Unfolding The Handle - Toro Power Plex 51481 Operator's Manual

2

Unfolding the Handle

No Parts Required
Procedure
1. Unfold the handle (A of
2. Press and hold the locking button on the upper shaft, align the locking button with the slotted hole on the lower shaft,
and slide the 2 shafts together. Once the slotted hole on the lower shaft is past the locking button, release the locking
button, and slide the lower shaft into the upper shaft until the trimmer is at the desired height (B of
Note: Use the locking button only for assembly and disassembly. You do not need to use the button to adjust the handle.
3. Tighten the lower shaft connector to secure the handle at the desired height (C of
Figure 2).
Figure 2
7
Figure 2).
Figure 2).
g195351