Weider WESY96400 User Manual page 29

REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
This chart is provided to help you identify the small parts used in assembly. Important: Some parts
may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags,
check to see if it has been pre-assembled. The number in parenthesis below each part refers to the
key number of the part. The second number refers to the quantity needed for assembly.
Please Note: The assembly is divided into five stages: 1) frame
assembly, 2) arm assembly, 3) cable and pulley assembly, 4) seat and
backrest assembly, and 5) VKR assembly. The hardware for each
stage is packaged separately. WAIT UNTIL YOU BEGIN EACH
ASSEMBLY STAGE TO OPEN THE PARTS BAG LABELED FOR THAT
ASSEMBLY STAGE.
WESY96400 R1296A