5. Press a 1Ó Square Inner Cap (65) into the side arm
(A) on the Press Upright (56).
Slide the Press Upright (56) onto the 5/16Ó x 2 1/2Ó
Carriage Bolts (1) in the Press Base (51). Hand tight-
en a 5/16Ó Nylon Locknut (3) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Press Upright (56) must be leaning
towards the center of the unit with the side arm facing
outward.
6. Slide the Butterfly Upright (42) onto the 5/16Ó x 2 1/2Ó
Carriage Bolts (1) in the Butterfly Base (4). Hand
tighten a 5/16Ó Nylon Locknut (3) onto each Carriage
Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Butterfly Upright must be leaning towards
the center of the unit.
5
65
51
6
6
A
56
3
3
1
42
3
3
4
1