Samsung AR TXCA Series User Manual page 27

NOTE
• The motion detect function operates only in Cool and Heat
modes.
• The motion detect sensor can detect human motions within 5 m.
It may not detect human motions outside the range.
• If any obstacle exists in front of the sensor or the site is subject to
direct sunlight or wind, the sensor may not operate properly.
• The motion detect sensor can more easily detect the side to side
motions of a person than the back and forth motions.
• The motion detect sensor is located at the bottom right of the
product. Therefore, when a person is located around the center of
the product, the sensor recognizes that the person is located at
the left and the product blows air accordingly.
• Some areas around the center of the sensor may not be detected.
• The motions of a warm-blooded pet, swinging heater, or robot
cleaner can be recognized as human motions.
• When a person stops movement within the detectable range, it
may not be detected.
• Because the motion detect sensor can recognize movement
of heats, it may not operate when a person turns backwards,
exposes the skin less or is blocked by obstacles such as laundry.
• The sensor's sensitivity may be lowered depending on the
thickness of clothes.
• If you change the current mode, airflow direction, or optional
function, the motion detect function is canceled.
• If a person takes body motions in the same place or there is no
movement for a long time, it is recognized as an absence.
• If there are little motions such as in cases of infants and patients,
or if little motions continue such as in cases of sleeping and
movie watching, it can be recognized as an absence.
• Do not place a large object, heating appliance, or humidifier near
the product.
• Do not touch the sensor. Failing to do so may result in product
damage or malfunction.
English
27