TAB-Austria Golden Island VC2 Operator's Manual page 17

First Steps for Initial Operation
Your "Golden Island" is delivered with standard settings in the operator mode.
To adapt your "Golden Island" to your personal requirements, please carry out the following
settings before the first accounts and after every Master Reset.
1. Before initial operation a Master-Reset is prerequisite.
( Manufacturer-Settings Master-Reset)
2. Attention:
The authorisation is deleted after a Master-Reset and must therefore
be installed anew!
3. Diverse basic setups should be checked and newly adjusted.
( Basic Settings)
4. For the extended safety accounts the mechanical counters are also
saved electronically.
You can determine the current mechanical counter to be the starting value
of the electronically counter.
( Hardware Settings 2
5. We recommend to secure the access to the operator mode with a PIN.
If your head supervisor (pub owner) should have access to the operator mode,
it is essential that operator and head supervisor have activated PINs.
( Pin Settings)
6. Select the coin for Hopper 2
( Hardware Settings 2
7. Refill Hoppers
( Refill Hopper)
All further settings that are not mentioned here and new, additional hardware components can
also be changed or adjusted during operation.
Meter Adjustment)
Hopper).
Page 17