Monster IlluminEssence Prism Quick Start Manual page 8

STEP 5
With connectors installed, return your first panel to the wall by
centering it over the mounting bracket so it snaps into place.
NOTE: Ensure the directional marker
is pointing in the desired direction for
your pattern.
STEP 6
Build out your Prism pattern by repeating these steps with
more panels and connectors, moving away from the controller.
STEPS:
A. Peel o the adhesive backing on a new panel.
B. Place the new panel on the wall over an open
C. Remove the panel and press on the bracket for 10 seconds.
NOTE: Once additional panels have been
installed, take extra care to hold down
neighboring panels when removing one.
D. Attach more connectors
with the GREEN
and replace the panel.
E. Make sure all connections
are secure.
Save this RED
connector for
the controller.
side out
NOTE: Ensure the
at the left side of the panel and that
any other connectors are GREEN.
GREEN
RED connector
connector.
is
7