Pairing Modes - Monster IlluminEssence Prism Quick Start Manual

STEP 3
Make sure your phone or tablet is successfully connected to the
2.4GHz Wi-Fi network that your Prism will be placed on.
Open the
account by following the on-screen instructions.
STEP 4
It is recommended to pair Prism in a location close to your router
BEFORE installation. Panels do not need to be connected to the
controller to pair.
Plug the power adapter into the bottom of the controller and
connect the other end to a powered wall outlet. The LED indicator
will begin blinking rapidly when it has entered pairing mode and is
ready to pair. (Any connected panels will blink as well.)

Pairing Modes:

EZ MODE - RAPIDLY BLINKING LED (default)
EZ Mode is the default mode for quick and easy pairing setup.
AP MODE - SLOWLY BLINKING LED
Access Point Mode is a secondary setup that can help connect to
mixed networks.
Press and hold the power button for 5-6 seconds to enter pairing
mode or change between pairing modes.
NOTE: At any point during pairing mode you can unplug and
reconnect the power to cancel pairing and operate the product
without Wi-Fi. Advanced features will not be available.
Follow the on-screen step by step instructions.
app and create an
LED indicator power button
3