Monster IlluminEssence Prism Quick Start Manual page 7

STEP 3
Remove the panel, leaving the bracket in place on the wall.
Press firmly on the bracket for 10 seconds to ensure a strong hold.
PRESS FIRMLY
for 10 sec
(damage-free
removal tab)
NOTE: If you ever want to uninstall your Prism panel in the future, simply hold
the bracket and SLOWLY stretch the damage-free removal tab down along the
wall to remove. They can be reinstalled with new 3M strips (rated at least 3lbs).
STEP 4
Attach connectors to your first panel: attach one connector for the
controller unit with the RED side out, and any additional connectors
as desired to build your pattern with the GREEN sides out.
Make sure to insert each connector fully into the slot.
TIP: Only one green side should ever be connected to any one panel at a time.
panel side
(green out)
controller
side
(example)
(red out)
remember your
design idea
6