Weider WESY2966.0 User Manual page 7

2. Attach the Base Cover (4) to the Base (2) with
two M4 x 50mm Screws (66). Do not over-
tighten the Screws (66). If you overtighten
the Screws, you will damage the Base
Cover.
See the inset drawing. Attach a Cable Clip
Hook (86) to the Upright Base (5) with two M5 x
16mm Screws (78). Attach the other Cable Clip
Hook in the same manner.
3. Attach the Upright (6) to the Upright Base (5)
with two M10 x 25mm Button Screws (64) and
two M10 Split Washers (88). Do not tighten
the Button Screws yet.
Attach the Rear Frame (10) to the Upright Base
(5) with two M10 x 32mm Button Screws (68),
two M10 Split Washers (88), two M10 x 70mm
Bolts (69), two M10 Washers (59), and two M10
Nylon Locknuts (56). Tighten the M10 x 25mm
Button Screws (64).
See the inset drawing. Attach the Crossbar (7)
to the Upright (6) with the Crossbar Cap (85),
two M10 x 65mm Button Screws (79), and two
M10 Washers (59).
2
66
3
6
64
59
88
69
5
7
4
2
66
5
86
86
68
88
10
56
79
59
85
7
6
78
68
88