Configuring Router; Connecting To Web-Based Interface - D-Link DWM-312W Quick Installation Manual

DWM-312W

CONFIGURING ROUTER

Connecting to Web-based Interface

Start a web browser. In the address bar of the web browser, enter the domain
name of the router (by default, dlinkrouter.local) with a dot at the end
and press the Enter key. Also you can enter the IP address of the device (by
default, 192.168.0.1).
If the error " The page cannot be displayed " (or " Unable to display the
!
page "/" Could not connect to remote server ") occurs upon connecting to
the web-based interface of the router, make sure that you have properly
connected the router to your computer.
If the device has not been configured previously or the default settings have
been restored, after access to the web-based interface the page for changing the
default settings opens.
Enter a new administrator password in the New password and Password
confirmation fields. You may set any password except admin. Use digits,
Latin letters (uppercase and/or lowercase), and other characters available in the
US keyboard layout.
name for the wireless network or leave the value suggested by the router.
Remember or write down the new password for the administrator
account. In case of losing the new password, you can access the settings
!
of the router only after restoring the factory default settings via the
hardware RESET button. This procedure wipes out all settings that you
have configured for your router.
Click the SAVE button.
4 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
4 In the Network name (SSID) field, specify your own
Quick Installation Guide
15