Advertisement
4. Attach the Cover Plate (3) to the Tray (B) with the
two Button Head Screws (C) that were removed
in step 3. Note: Make sure the decal is over the
indicated resistance bars
5. Attach a "U"-channel Extension (4) to a "U"-chan-
nel (D) with two 1/4" x 12mm Flat Head Screws
(7).
Attach the other "U"-channel Extension (4) to
the other "U"-channel (D) in the same manner.
6. Make sure that all parts have been properly tightened. To use the MAX PACK to add resistance, refer
to ADJUSTING THE RESISTANCE in the resistance system user's manual.
4
3
Resistance
Bars
5
5
C
Decal
B
4
D
7
Advertisement
