Page 3
GDI Communications LLC. Recipient further agrees not to incorporate these drawings, specifications or technical information, in whole or in part, in any other product or endeavor.
ST or FC off for full duplex and on for half duplex. type connectors. The Fiber Optic section of the FLD-496SA-1 has a range of about The FLD-496SA also has anti-streaming 3-5 Km depending on the connector loses capability that can be turned on and off and quality of the cable.
Power Budget ....12 to 20 dBm Power ....90-135 VAC 50-60Hz INSTALLATION < 2 Watts The FLD-496SA is very easy to use and Temperature ..-37° to +74° C install in a system. The only connector on Humidity .... 5- 95% non-condensing the rear panel is the FSK connector.
Page 7
FLD496SA-2 and used ports the eye. Leave the protectors on unused ports. If DET 2 of the FLD-496SA-2 is not being used in either a Master or Local/Slave In the Master Mode of operation, both (last Slave in a Line) a p p l i c a t i o n , t h e Emitter 1 and Emitter 2 have the same D E T 2 s h o u l d b e disabled.
You should never touch the ends of the fiber optic cables. Dirt and dust can render the cable useless. If the cables The FLD-496SA does not require any need to be cleaned, use reagent grade normal routine maintenance. The only...
Page 11
Communications, L.L.C. TRAFFIC ELECTRONICS MANUFACTURER ♦ SPECIALIZING IN COMMUNICATIONS 280 1-80 WEST, EXIT 1 P . O . B O X 1 3 3 0 V E R D I , N E V A D A 8 9 4 3 9 TELEPHONE: (775) 345-8000 FAX: (775) 345-8010...