Page 1
SM560SA Manual SM560SA MANUAL 56 K SMART MODEM STAND ALONE GDI Communications, LLC Verdi, Nevada SM560SAMAN...
Page 2
SM560SA Manual SM560SA MANUAL REV. B GDI Communications, LLC 280 Interstate 80 Exit 1 Verdi, Nevada 89439 775-345-8000 This Manual applies to units with serial numbers 00000 and above Drawing Number: A00350 APPROVED: Engineering_______________________________ Date_______________ Manufacturing_____________________________ Date _______________ Marketing_________________________________ Date _______________...
V.34 AT command set Modems and is designed for ENVIRONMENTAL traffic control environments. The SM560SA has a built in power supply and Temperature Range……..-37° to +74° C plugs into a standard outlet. The Humidity ..….5 to 95% non-Condensing SM560SA-12 connects to a 12VDC supply.
Data Carrier…….1800 ± 0.5 Hz DCD, RI. Calling Tone……1300 ± 10 Hz Answering Tone…2100 ± 15 Hz Th SM560SA can store 2 user profiles and 4 phone numbers. The numbers can have Receiver Freq. Tol…….±14 Hz up to 32 digits.
485 OPTION The RJ11 connectors are connected in parallel so do not use the phone while the The SM560SA has the 120-Ohm modem is being used. termination resistors built into the unit on the input lines (TXD and RTS). This...
The following pages contain a summary of the AT Commands and “S” Registers that the SM560SA responds to. The factory default settings are also shown. A complete definition of the AT commands is too large for this Manual (174 pages). If one is required, a PDF file (450K) can be sent electronically to you.
Page 8
SM560SA Manual BILL OF MATERIAL FOR THE SM560SA RS-232 VERSION Item PART DESCRIPTION REFERENCE NUMBER PCB-336SA PC Board for the Sm336SA Rev. B FP-560SA Front panel w/silkscreen BP-560SA Back panel w/silkscreen P/CORD-18/3B Power cord, 18 AWG SR-1150 Strain Relief, Power Cord, Heyco...