LG F 4 J5 T Series Owner's Manual page 15

Connecting Hose to Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the hose connector onto the water supply
tap.
Connecting Screw-Type Hose to Tap
Without Thread
Loose the four fixing screws.
1
Upper
connector
Fixing screw
Remove the guide plate if the tap is too large
2
to fit the adapter.
Guide plate
Push the adapter onto the end of the tap
3
so that the rubber seal forms a watertight
connection. Tighten the four fixing screws.
Push the supply hose vertically upwards
4
so that the rubber seal within the hose can
adhere completely to the tap and then tighten
it by screwing it to the right.
Rubber
seal
Connecting One Touch Type Hose to
Tap Without Thread
Unscrew the adapter ring plate and loose the
1
four fixing screws.
Ring plate
Remove the guide plate if the tap is too large
2
to fit the adapter.
Guide plate
Plate
Supply
hose
EN
15