Advertisement
Step 4. Adjusting the Settings (see fig. 8~10)
Time control：Turn the time control knob to"+"
side to increase the illumination time (7 minutes
max.), turn the control knob to "－" side to reduce
the illumination time (30 seconds min.).
Sensitivity control：Adjust the detector range of
Passive Infrared Motion Sensor (± 2M ~ 10M)
Selecting working mode:
Mode 1: Suggested setting when out of
town
- Light + camera : all day detection
- Daytime and nighttime: light, camera are all in operation
Mode 2: Suggested for day to day use
- Light at night + camera all day
- Daytime: light is off, camera is on,
LED indicator：for indicating the function status of the unit by different color LED lights.
1) Red： SD card is not inserted into the SD slot or the system is malfunctioning.
2) Green： The unit is recording or USB is inserted and connecting with the computer
3) LED off: stand by（SD card is inserted into the slot）, when off/record button is pressed
Please note when off/record button is pressed, remove SD card within 30 seconds (now the LED will
turn red after SD card is removed from the slot)
Reset button： restore functions to default settings
1) Press RESET button once each time you turn on unit.
2) Please press this button in case of system malfunction.
Fig. 9
Fig. 8
Fig. 10
Advertisement
