Assembly Extempore Table/Bench; Assembly Extempore With Extended Tabletop - Extremis EXTEMPORE TABLE Assembly Instructions, How To Use, Useful Tips For Keeping Your Tool For Togetherness In Shape

ASSEMBLY EXTEMPORE TABLE / BENCH
WHAT YOU NEED
2 people
no. 13 spanner
no. 4 hex key
+/- 15 min.
2. Insert the 4 assembly rods in the holes provided to that
end in the corner elements. Tighten the rods by means
of the 4 bolts using a no. 13 key. Do not tighten the
bolts too much as this could cause them to break.

ASSEMBLY EXTEMPORE WITH EXTENDED TABLETOP

WHAT YOU NEED
2 people
+/- 15 min.
4 assembly extempore table / bench + table with extended tabletop + floor fastening
1. Put the bench / the tabletop on the ground upside
down (the wooden surface should face the ground).
Use the packing material to protect the surface.
3. Now the legs can be put onto the four corner elements.
The legs can be fixed by tightening the 2 little screws
on each leg with the socket-screw key. Turn it around,
All done!
1. Slide the tabletop sideways as far as you can.
2. Put the table top extension in the open space ensuring
the metal strip at the end of the extra leaf ends up
under the tabletop you have just slid sideways.