Cleaning And Maintenance - TECHWOOD TAB-325 Instruction Manual

In use, the battery discharges. When the charging light flashes, it is necessary to
charge the battery.
Make sure the unit is fully charged before using.
After installing accessory, choice if you used brush or not and then press the
switch on the handle to start the unit.
Note: One pressure : The vacuum starts running at the "Eco" speed, (the unit runs
at low speed). Two pressures : the vacuum cleaner will operate at its maximum
speed. You can select the speed according to your needs.
To stop the vacuum, press the switch a third time.

CLEANING AND MAINTENANCE

Before cleaning, disconnect the charger if it is plugged in the wall socket.
Clean the outside of the apparatus with a sponge or slightly wet linen.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
Remove the tube or accessory from the body of the appliance by pressing the
release button.
Remove the dust container by pressing the button (1).
Remove the tank from its housing in the appliance (2).
Empty the garbage on top of a bin (3).
Clean the tank and replace it.
Clean the plastic filter if necessary (possibly with a toothbrush) to remove small
dust. Wash, rinse and dry. Make sure the parts are dry before assembling them
for the next use.
8