Table of Contents
Advertisement
Quick Links
2 in 1 VACUUM CLEANER
TAB-8183
Dear consumer, Please read these instructions carefully before use in
order to avoid damage due to incorrect use and to better understand the
functions of this product. Please pay particular attention to the safety
guide.
If you pass the device on to a third party, these Operating Instructions
must also be handed over.
Please keep them for future references.
Instruction manual
TAB-8183
TAB-8186
TAB-8186
1
Advertisement
Table of Contents
Related Manuals for TECHWOOD TAB-8183
Summary of Contents for TECHWOOD TAB-8183
- Page 1 TAB-8183 TAB-8186 2 in 1 VACUUM CLEANER Instruction manual TAB-8186 TAB-8183 Dear consumer, Please read these instructions carefully before use in order to avoid damage due to incorrect use and to better understand the functions of this product. Please pay particular attention to the safety guide.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS The appliance is only to be used with the power supply unit provided with the appliance. Please read these instructions carefully before use. Keep present instructions for future references. Check that your mains voltage corresponds to that stated on ... - Page 3 appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are supervised. Keep the appliance and its cord out of reach of children aged ...
- Page 4 Make sure the appliance has cooled down before cleaning and storing it. The temperature of accessible surfaces may be very high when the appliance is operating. Never touch these parts, of apparatus, to avoid burning itself. Make sure the appliance never comes into contact with ...
-
Page 5: General Information
GENERAL INFORMATION The symbol "OPEN BOOK" means a recommendation to read important things contained in the record. The symbol "BIN" crossed out, abbreviation WEEE (Waste of Electrical and Electronic Equipment) means that at the end of life, it should not be discarded with household waste, but filed to the sorting of the locality. -
Page 6: Before The First Use
than 50 volts AC or 120 volts DC. Materials with this sign are classified as Class III. The symbol "TRIMAN" indicates that the consumer is invited to dispose the product as part of a separate collection (eg recycling bin, waste, voluntary intake point). - Page 7 TO KNOW IT’S DEVICE 1. handle 2. On / Off button 3. Power adjustment knob 4. Unlock button to fold the device 5. Base of the portable vacuum cleaner 6. Portable vacuum cleaner 7. Air outlet 8. Vacuum / Support Contact 9.
- Page 8 Assemble the stand and the rotating brush. Insert the bottom tube of the holder into the rotating brush and push it down until the tube is well assembled with the brush. Assemble the vacuum cleaner on its support. Slide the bottom part of the vacuum cleaner in the support (1).
- Page 9 CHARGING - When the product is shipped from the factory, the battery is not fully charged. Please, Charge the battery before using it. (it takes about 8 hours to fully charge it). - If not used for more than one month, fully charge the battery then unplug the power adapter.
- Page 10 Power selector Press the power button "On" the device is in max power mode. When it is activated, Press the power button "On" again the unit will enter soft power mode. In LOW speed, press "On" again, it will go off. Press "ON" again to return to HIGH speed.
-
Page 11: Cleaning The Brush
EMPTY THE DUST COMPARTMENT AND CLEAN THE FILTER 1. Remove the hand-held vacuum from its holder by pressing the release button. 2. Separate the tank from the body of the unit by pressing the release button (1). 3. Remove the assembly: dust container and filter (2). -
Page 12: Cleaning And Maintenance
If necessary, locate the Lock / Unlock button on the motorized brush shaft (N ° 21 in the diagram Knowing your device). Open it as much as possible and remove the brush roll. Clean it. Return it to the original position and press Lock until "click". -
Page 13: Specifications
webs etc) as well as cleaning, maintenance or it replacement of wearing parts are not guaranteed and are thus to pay ! In the event of foreign intervention, the guarantee becomes null and void. After flow of the warranty period, repairs can be carried out, against payment, by a specialized trade or a repair service. -
Page 14: Environmental Protection
CAUTION: order to minimize the risks of electric shock, In the event of breakdown, not to open the case but to call upon a qualified technician for repairs. This device complies with EC directives, it was controlled according to all current European directives, applicable such as: electromagnetic compatibility (EMC) and low voltage (LVD).