TECHWOOD TAS-124C Instruction Manual
  1. Manuals
  2. Brands
  3. TECHWOOD Manuals
  4. Vacuum Cleaner
  5. TAS-124C
  6. Instruction manual

TECHWOOD TAS-124C Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VACUUM CLEANER
INSTRUCTION MANUAL
Dear consumer, Please read these instructions carefully before use in
order to avoid damage due to incorrect use and to better understand the
functions of this product. Please pay particular attention to the safety
guide.
If you pass the device on to a third party, these Operating Instructions
must also be handed over.
Please keep them for future references.
TAS-124C
TAS-125C
TAS-126C
TAS-126C
TAS-124C
1

Advertisement

Table of Contents
loading

Related Manuals for TECHWOOD TAS-124C

Summary of Contents for TECHWOOD TAS-124C

  • Page 1 TAS-124C TAS-125C TAS-126C VACUUM CLEANER INSTRUCTION MANUAL TAS-126C TAS-124C Dear consumer, Please read these instructions carefully before use in order to avoid damage due to incorrect use and to better understand the functions of this product. Please pay particular attention to the safety guide.

  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS Please read these instructions carefully before use.  Keep present instructions for future references.  Check that your mains voltage corresponds to that stated on the appliance.  Only use the appliance for domestic purposes and household or similar ...
  • Page 3 Never place it into the dishwasher.  Never use the appliance near hot surfaces.  Do not operate the appliance with a damaged cord or plug, or after the  appliance has been damaged in any manner. If the supply cord or appliance is damaged, it must be replaced by the ...

  • Page 4: First Use

    FIRST USE Before first use, remove the unit and all accessories carefully and paying attention to the sharp accessories. Clean the outside and inside of the machine cabinet with a damp cloth and wipe dry.  Unroll the power cord completely. ...

  • Page 5: Brief Information

    IMPORTANT . Always remove the plug from the power socket when the appliance is not in use and before carrying out any cleaning or maintenance operations. . Always remove the plug from the power sock before opening the appliance. . Never use methylated spirits or other solvents to clean the appliance. .

  • Page 6: Assembling The Vacuum Cleaner

    NOTA: The cable have two markers. Yellow and Red marker Please stop to pull the wire when you see the yellow marker ASSEMBLING THE VACUUM CLEANER Assembling the flexible tube Put the end of the hose into the air intake socket. It is on the tank. To close, turn the hose clockwise at 90°...

  • Page 7: Using The Cleaning Accessories

    USING THE CLEANING ACCESSORIES  Dual-position carpet/floor brush. Pos. 1: bristles extended. for hard floors Pos. 2: bristles retracted for carpets Narrow nozzle. For cleaning radiators: corners, edges, drawers etc. Empty & Clean the dust tank Fig • 1. Disconnect from the main supply 2.

  • Page 8: Cleaning And Maintenance

    Clean the air filter output 1. Remove the cover (rear of unit) 2. Remove the filter In the 2 cases: Clean with water, rinse, let dry and replace before the next use. CLEANING AND MAINTENANCE Before cleaning, Always: switch off the appliance, disconnect the apparatus and let it cool.
  • Page 9 STORAGE - Ensure the unit is completely cool and dry. - Do not wrap the cord around the appliance, as this will cause damage. - Keep the appliance in a cool, dry place and out of reach from children. GUARANTEE Before being delivered, all our products are subjected to a rigorous control.

  • Page 10: Specification

    (LVD). This apparatus was designed and manufactured in respect of the last safety regulations and technical specifications. SPECIFICATION BRAND TECHWOOD REFERENCE TAS-124C ENERGY EFFICIENCY CLASS ANNUAL ENERGY CONSUMPTION (based on 50 cycles. The annual 40kWh / year consumption depends on the use of the...

  • Page 11: General Information

    GENERAL INFORMATION The symbol "OPEN BOOK" means a recommendation to read important things contained in the record. The symbol "FLASH" is intended to alert the user to the presence of current within the device. Do not open it, it could constitute a risk of electric shock.
  • Page 12 The symbol "HOT WALL" warns the user that the walls of the unit can become very hot, and to take precautions as required. The symbol "DOUBLE SQUARE" means a double insulated. A basic insulation and supplementary insulation. This device requires no connection to the mass of a protective conductor grounded.

This manual is also suitable for:

Tas-125cTas-126c

Table of Contents