Thuraya SatSleeve Hotspot Manual page 4

Inserting the Battery
Remove the battery cover by pushing it downward
(1) and sliding it down (2).
Insert the battery from the top end first. Once the
battery is in place, reinstall the battery cover.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Turning On the satellite unit
Press and hold the power button down for about 2
seconds to power on the unit. The blue LEDs will
blink and you will hear a beeping sound. The unit is
now ready to connect with your smartphone.
To turn the unit off, press and hold the power button
down for about 2 seconds until all of the red LEDs
are flashing and you hear a beeping sound.
3