Table of Contents
Advertisement
Flame Adjustment
Adjust the flame ON/OFF by turning the gas
shutoff valve counterclockwise
or clockwise
During the 2-3 hour appliance curing period,
you may detect an odor from the appliance
as the various paints and compounds used in
the manufacturing of this log set cure. This is
a normal and temporary situation that is not
cause for alarm. However, you may want to
provide extra ventilation to the room during
this time.
• Keep the area around the log set clean and clear of debris.
• Occasionally, you may use a soft bristle brush to clean logs.
• Once every year a qualified agency or certified chimney sweep should examine and clean
the venting system of the fireplace.
Purchase these fireplace accessories from your local dealer. If they can not supply these
accessories, contact customer service department for information.
EQUIPMENT SHUTOFF VALVE
For all models. Equipment shutoff valve with
1/8" NPT tap. Fits 1/2" NPT pipe.
12
OPERATION
GAS SHUTOFF VALVE OPERATION
to open
to close, as necessary.
CURING LOGS
CARE AND MAINTENANCE
ACCESSORIES
www.usaprocom.com
Shutting Off Appliance
Turn gas shutoff valve clockwise
OFF position.
To ensure proper curing of the logs:
• Ignite a 2" flame and maintain it for 1 hour.
• Burn the logs in consecutive 1 hour periods
raising the flame an additional 2" to full
flame height for a total of three hours.
NVDWA1 - ON/OFF SAFETY PILOT
VALVE KIT
For all models. Required for propane/LP
installation.
to the
200064-01A
Advertisement
Table of Contents
