Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens LR18HLT25
Summary of Contents for Siemens LR18HLT25
- Page 1 Ceiling-mounted ventilation system LR18HLT25 User manual and assembly instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Safety The appliance can only be used safely if it is Table of contents correctly installed according to the safety in- structions. The installer is responsible for en- Safety ................ 2 suring that the appliance works perfectly at its Preventing material damage ........ - Page 3 Safety en ▶ Never work with naked flames close to ¡ Items placed on the appliance may fall the appliance (e.g. flambéing). off. ▶ Do not place any objects on the appli- ▶ Do not install the appliance near a solid fuel heating appliance (e.g. wood- ance.
-
Page 4: Preventing Material Damage
en Preventing material damage ¡ Condensation that flows back in may damage the ▶ Repairs to the appliance should only appliance. be carried out by trained specialist The air extraction duct must be installed with a ▶ staff. gradient of at least 1° from the appliance. ¡... -
Page 5: Operating Modes
Operating modes en Clean or replace the filters at regular intervals. Start up the appliance The effectiveness of the appliance is increased. Shut down the appliance Increase the fan setting Put the cooking lid on. Decrease the fan setting The cooking vapours and condensation are re- duced. - Page 6 en Basic operation Switching off the appliance Switching on the fan run-on Switch the appliance off when you are not using it. During the fan run-on, the appliance continues to run for a short time and then switches off automatically. Press to switch the appliance off.
- Page 7 Basic operation en ¡ Highest setting: Fan setting 5 Switching on the lighting The lighting can be switched on or off independently of Setting the sensor control the ventilation. Requirement: The appliance is switched off. Press . ▶ Press and hold and for approx. three seconds. Note: Colour temperature settings are available in the Press ...
-
Page 8: Hob-Based Hood Control
en Hob-based hood control As soon as the appliance is connected to the home Resetting the appliance to the factory network, establish the connection to the hob via the settings Home Connect app. Requirement: If you reinstall the appliance after disas- Follow the instructions on your mobile device. sembly, you will need to reset the appliance to the fact- ory settings so that the reference movement is carried out correctly. - Page 9 Home Connect en Note: The appliance cannot be switched on during the Follow the instructions for the Home Connect app connection process. Press to cancel the process. on the mobile device. a The login process is complete when LED 7 stops Requirements flashing and remains continuously lit. ¡...
-
Page 10: Cleaning And Servicing
A detailed RED Declaration of Conformity can be found functions for use and is only required when you want to online at www.siemens-home.bsh-group.com among use the Home Connect functions for the first time. the additional documents on the product page for your appliance. - Page 11 Cleaning and servicing en Open the filter cover by pulling it downwards. Cleaning controls WARNING ‒ Risk of electric shock! Penetrating moisture may cause an electric shock. Do not use wet sponge cloths. ▶ Observe the information regarding the cleaning agents. → "Cleaning products", Page 10 Clean using a damp sponge cloth and hot soapy water.
- Page 12 en Cleaning and servicing Open the odour filter cartridge. Cleaning grease filters in the dishwasher The grease filters filter the grease from the cooking va- pour. Regularly cleaned grease filters guarantee a high level of grease removal. WARNING ‒ Risk of fire! Fatty deposits in the grease filters may catch fire. Clean the grease filters regularly.
-
Page 13: Troubleshooting
Troubleshooting en Safely dispose of the empty or defective batteries Close the cover. ▶ in an environmentally friendly manner. Dispose of the empty batteries in an environmentally friendly manner. Remove the cover. Remove the empty batteries. Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. -
Page 14: Customer Service
en Customer Service Fault Cause troubleshooting LED 1 flashes in the LED display. The grease filters are saturated. → "Cleaning grease filters in the dish- ▶ washer", Page 12 → "Cleaning grease filters manually", ▶ Page 11 LED 2 flashes in the LED display. The odour filters are saturated. Change the odour filter. -
Page 15: Installation Instructions
Installation instructions en Dispose of batteries in an environmentally friendly Safety clearances ▶ manner. Comply with the safety clearances for the appliance. Only for EU countries: According to the European Guideline 2006/66/EC, defective or used bat- tery packs/batteries, must be collec- ted separately and disposed of in an environmentally correct manner. - Page 16 en Installation instructions To ensure correct installation, you must use a Dimensions ▶ material which is sufficiently stable and suitable You will find the dimensions of the appliance here for both the structural conditions and the weight of the appliance. ¡ Changes to the electrical or mechanical assembly are dangerous and may lead to malfunctions.
- Page 17 Installation instructions en ¡ Improper installation is dangerous. ¡ This appliance complies with the EC interference suppression regulations. Connect and operate the appliance only in ac- ▶ ¡ The appliance corresponds to protection class 1. cordance with the specifications on the rating Therefore, only use the appliance with a protective plate.
- Page 18 en Installation instructions Position the appliance on the scissor lift table so Fitting the frame that the appliance is on the frame. Screw the two opposite screws into the ceiling until they protrude out of the ceiling by approx. 7 mm. 900 mm 492 mm Do not place the appliance on the grease filters as...
- Page 19 Installation instructions en Thread the four cables into the lock nuts. ATTENTION! There is a risk of damage to the appli- ance if the cable is coiled up. Always secure the cable firmly using the strain ▶ relief so that it does not coil up fully in the appli- ance.
- Page 20 en Installation instructions Thread the four enclosed cable clamps and secure ATTENTION! There is a risk of damage to the appli- in place approx. 20 mm in front of the cable ten- ance if the cable is coiled up. sioner. Always secure the cable firmly using the strain ▶...
- Page 21 Installation instructions en Remove the grease filters. Fitting the filter cover WARNING ‒ Risk of injury! ¡ Components inside the appliance may have sharp edges. Wear protective gloves. ▶ ¡ Risk of injury when opening and closing the hinges. Keep your hands away from the hinges. ▶...
- Page 22 en Installation instructions Remove the cable on the appliance from the ter- Removing the appliance minal plug and the strain relief. WARNING ‒ Risk of injury! Components inside the appliance may have sharp edges. Wear protective gloves. ▶ Cover the hob to prevent damage. Press the ...
- Page 23 Installation instructions en Open the cable tensioner and pull out the cables. Thread the cables out of the frame cover. ATTENTION! There is a risk of damage to the appli- ance if the cable is coiled up. Always secure the cable firmly using the strain ▶...
- Page 24 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001522146* 9001522146 (000129)