Operation Symbols; Quickstart Label Symbols - Champion 200947 Operator's Manual

Walk behind blower
Table of Contents

Advertisement

200947 - WALk BEhiND BLOWER

Operation Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYmBOL
Choke/Run
Fuel Valve: CLOSED/OPEN
Throttle Lever
FAST: forward position
Throttle Lever
SLOW: rear position

Quickstart Label Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Starting the Engine
1. Check Oil Level. Recommended oil is 10W-30. The engine
can be seriously damaged without oil. Always check the oil
level before using. The machine must be resting firmly on
level ground when checking.
2. Add gasoline with a minimum octane rating of 87 and an
ethanol content of less than 10% by volume.
3. Move the choke lever to "ChOKE" position.
4. Move the throttle lever, on the handle at the user position,
to the "FaST" position (forward).
5. Move the fuel valve to "OPEN" position.
6. Pull the starter cord slowly until resistance is felt and then
pull rapidly.
7. As engine warms up, move the choke to "RUN".
mEaNING
1
2
10W-30
5
Artwork Notes
3mm corner radius; 2mm safe margin
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
SYmBOL
3
4
1
2
6
7
Stopping the Engine
1. Move the fuel valve to the "CLOSED" position.
2. Press the engine switch to the "OFF" position.
LPN
2197-L-OP
Rev
A
K
Size
75 x 35 mm
Revision Changes
---
11
iMPORTANT SAfETY iNSTRUCTiONS
mEaNING
Fuel Gauge: Full
Fuel Gauge: Empty
Stop
2197-L-OP-A
Colors
152
CG1
186
---

Advertisement

Table of Contents
loading

Table of Contents