Kohler K-702101 Installation Manual page 8

Install the Wall Jambs (cont.)
Align the holes in the wall jamb with the holes in the wall and secure the wall jamb to the wall
with two #8–18 x 1–1/2" panhead screws. Insert a screw through a bumper at the center screw hole
location and tighten. Do not overtighten. The bumper may lose its shape.
Repeat the steps to locate the second wall jamb on the opposite wall, making sure the wall jambs
are located directly opposite of each other.
1054858-2-A 8 Kohler Co.