Convert A Standard Actuator Into A Full Stroke Adjustment Version - Emerson Bettis Q Series Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
DOC.IOM.BQ.E Rev. 3
C.2 Convert a Standard Actuator into a Full Stroke
Adjustment Version
Before starting to assemble the Full Stroke adjustment kit, please check the kit for
completeness. See Figure C-2.
Figure C-2
Table C-1
Pos.
40
41
42
43
44
45
46
9
10
11
12
13
1. The same Full Stroke adjustment end cap is used for both double acting and spring return actuators
(flat double acting actuator end caps with Full Stroke Adjustoment options are not available).
Appendix
Full Stroke Adjustment Kit Content
Content Full Stroke Adjustment kit
Description
End cap - Full stroke adjustment
Full Stroke adjustment screw
Full Stroke adjustment Nut
Full Stroke adjustment washer
O-Ring - Full Stroke adjustment screw
O-Ring - Thread bush
Thread bush
End cap screw
Washer end cap screw
O-ring end cap
Warning sticker DA Full Stroke adjustment
Warning sticker SR Full Stroke adjustment
13
12
41 42
43 44
40 9 10
Material
Cast Aluminium alloy
Stainless steel
Stainless steel
PA66
Nitrile rubber
Nitrile rubber
Aluminium
Stainless steel
Stainless steel
Nitrile rubber
Polyester
Polyester
Appendix
April 2019
45 46
11
Qty. Notes
2 1
2
2
2
2
2
2
8
8
2
2
2
63