Table of Contents
Advertisement
Reversing Doors ( * )
Your appliance is designed with reversible doors,
so that they may open from either the left or right
hand side to suit your kitchen design.
NOTE
• Reversing the doors must be performed by the
qualified personnel of LG Electronics. If not, the
doors will not be covered by the warranty.
• ( * ) : This feature varies depending on the
model purchased.
Leveling the Appliance
To avoid vibration, the unit must be levelled.
If required, adjust the levelling screws to
compensate for the uneven floor.
The front should be slightly higher than the rear to
aid in door closing.
levelling screws can be turned easily by tipping the
cabinet slightly.
Turn the levelling screws counterclockwise
lower the unit, clockwise
to
to raise it.
Connecting the Appliance
After installing the appliance, connect the power
plug into a socket outlet.
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 2 or 3 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the Appliance
1
Remove all food from inside the appliance.
2
Pull the power plug out, insert and fix it into
the power plug hook at the rear or on top of
the appliance.
3
Tape parts such as shelves and the door
handle to prevent from falling off while moving
the appliance.
4
Move the appliance with more than two
people carefully. When transporting the
appliance over a long distance, keep the
appliance upright.
5
After installing the appliance, connect the
power plug into a socket out to switch on the
appliance.
EN
13
Advertisement
Table of Contents
